0

Dumb Question - Emitter, Blaster

Juan Sanjur

December 29, 2015 18:49

None

Follow

Im sorry if this has been asked before but im not clear on the concepts

I have an itach WF2IR that came with 3 IR Emitters and 1 Blaster.    On my setup i want to control:

1 - Non Smart LG TV

1 - Yamaha Receiver RX-V465

1 - Element i4 Android Box

1 - Motorola Cable TV Box

1 - Split Air Conditioner

 

Questions

A).... A blaster connected to port 3 pointing directly to all the devices (Except the A/C) should be enough to control them all??

B) If i connect the IR Emitter on port 1 or 2 poiting to the A/C, will i be able to control it?  (Im not really sure how these emitters works?)

 

Thanks 

• Facebook
• Twitter
• LinkedIn

2 comments

• 0
  
  John Cagle January 25, 2016 17:35

  A) yes up to distance of ~5 meters 

  B) I've not used the emitters but supposed to be in close proximity to receiver device. So limited by length of wires and position of itach installation.

• 0
  
  Brian Kerth February 10, 2016 19:13

  Hello Juan,

  To clarify what John mentioned, the IR emitter has a maximum distance of a few inches. Those are designed to be placed directly over the IR receiver of the end use equipment.