0

wf2ir stopped working

Scott Borgna

January 02, 2013 08:09

None

Follow

Hi Guys,

Today my wf2ir stopped working after a couple of months use.

The device appears to be stuck in a boot/reset sequence.

When I look at the back lights the following occurs;

All four lights start blinking rapidly for a second or so, then the power light stays solid for a couple of seconds, then the 3 IR lights go on solid for say half a second, then all four lights start blinking rapidly again.

This sequence just continues over and over again.

I have tried resetting the device, but the same happens. The device is not visible as an adhoc network either.

Does anyone have any advice?

Cheers

Scott

• Facebook
• Twitter
• LinkedIn

5 comments

• 0
  
  Victor January 06, 2013 14:46

  Hello I had the same problem!

  My Wi Fi to IR Itach starts to blink the lights at the first time I put it on power.

  
  After some minutes it sttoped to work and dont blink any light, even the power.

   

  If somebody have any recommendation please share with us.

  
  Thanks in advance!

• 0
  
  jorge seiki de lima January 09, 2013 10:38

  Hello,

  i have itach relay wifi, the same happened to me, i don´t know what to do!!!

• 0
  
  patrik wihlborg January 10, 2013 07:48

  Hi, also my  ip itach stoped working January 9th. I think windows uppdate was the reson.

  please advice.

  patrik

• 0
  
  jorge seiki de lima January 10, 2013 09:44

  thank´s man, but i don´t believe is resolution my case. My case same is the victor.

   

  but i try....