0

Changed network, how to change static IP on iTach unit

Justin Lake

November 22, 2012 05:33

None

Follow

When I originally set up the iTach unit my LAN was using 192.168 IP addresses so I set the iTach to a static address of 192.168.0.98.

I just installed a new router (AirPort Extreme) and the default IP range is 10.0.x.x.  I realize I can change the range on the router, but I've already got everything else on the network set up the way I want with the new range.  I can "see" the iTach unit with iHelp, but I can't get to the configuration screen.

 

I'm using the Mac version of iHelp on an MBP.

Any ideas?

• Facebook
• Twitter
• LinkedIn

1 comment

• 0
  
  Josh Sherman November 27, 2012 19:39

  What you will need to do is put the PC or Mac you are using back into the same subnet as the iTach unit, meaning that it will need to have an IP address of 192.168.0.** where ** is a number other than 98. This will allow you to talk to the unit (and only the unit) and configure it to a different IP address. Once you configure it to the 10.0.**.** IP address range you will lose communication with the iTach again until you change your computer's IP address back to the 10.0.**.** subnet once more.