I am getting my iTach Flex IP to just have a rapid blink and it can't be found anywhere on the network (old IP, new default IP, in help, etc). If I press and hold the button for a bit I will get some slow blinking and then it goes right back to the fast. Does anyone know how to make this thing respond? I've tried holding while powering, etc. and nothing seems to work. Ideas? Thanks!
Date
Votes
1 comment
-
Garrett Gustafson Hi Jon,
A factory reset of the iTach Flex can be accomplished by holding the button on the left of the unit for about 13 seconds. The unit will flash four times slowly and then change to a moderate flash. The moderate flash is to put WiFi units into WPS mode. For a reset continue holding the button until the third and final flash pattern is seen. The final pattern a rapid blinking or flickering. Once this flash pattern has been seen the button can be released and the unit will reset.
If resetting the unit does not change the unit back to a slow blink please e-mail our technical support team at support@globalcache.com
Please sign in to leave a comment.