0

Question about ItachFlex and Ir led

Florian Cayreyre

April 16, 2013 19:22

None

Follow

Hello,

When i plug an Ir cable to my Itach Flex the Ir Led is by default on and blink a little bit.

Is it possible to disable the led light when im not sending Ir codes ?

 

Thanks for your help

• Facebook
• Twitter
• LinkedIn

2 comments

• 0
  
  Josh Sherman April 22, 2013 18:56

  You will want to get into the settings of your Flex and make sure that the Flex Link Port is configured for Single IR Emitter, with Blaster set to false. This should resolve the issue you are seeing.

• 0
  
  Seth Scott May 12, 2013 00:48

  My itach flex is now doing the same thing after I updated the firmware today (5/11). As soon as I power on the itach flex my ir emitter led lights up and will not go out, therefor none of my ir commands are being received by my tv.
  
  My setup includes 1 ir emitter placed inside of my samsung tv, itach flex mounted behind the tv. Everything worked fine until I updated the firmware. Please help.