Does anybody have an idea of what i need to include in my setup to control a 120V source using an iTach WF2CC? I would like to control some outdoor lighting with the module, but the solid state relays are only rated at 24V according to the spec sheet. From the research I did on the matter I came to the conclusion that i need a SPST relay that can be turned on or off using a 12v - 24v source. I could use some help getting pointed in the right direction.
Thanks
You are correct in your thought that you will need to trigger a higher voltage relay with the WF2CC relay in order to use our unit to switch a high voltage line. Search keywords you will want to use are "120V", "Relay", "Trigger", "Switch" or similar. Relays such as the one at the link below are similar to what you are looking for, but the most important thing in situations like this is to confirm the input trigger mechanism. As this is not clearly documented, you will either need to find the technical documentation or call the manufacturer to get this information.
