Hello,
I have a problem sending IR through a GC-100-12.
I also have a WF2IR unit. When sending the exact same signal through the WF2IR everything works fine.
The signal through the GC100 is taking much longer and isn't recognised.
GC-100-12
ir port is set as IR Out
| Firmware Version: | 3.2-12 |
WF2IR
ir port is set as IR Out
Firmware Version: 710-1001-05
I'm using Commandfusion as intermediate.
Plz help or advice would be more then welcome.
Jeroen Hopman,
Netherlands