3

Capturing Air Conditioner IR commands with GC-IRL

Hi there,

My name is Dimas, I'm from control4 Indonesia.

I have a problem on my client. He uses a Daikin split air conditioner on most of his room. He wants me to control all of it via control4. I usually don't have any problem controlling AC using IR. But in this project, a strange thing happen. Everytime I emmit the IR codes, the IR probes didn't blink at all.

I even try to use a global cache GC-100 instead of HC300's IR port because someone from control4 ask me to try to control it using GC100 instead of HC300 controller, but still no luck. When I use the IR port and probes to another device driver, it worked normally.

On some of his bigger room, he uses a cassette daikin air conditioner. It worked perfectly even with controller's IR ports.

Please give me an advice to solve this problem.

here is a sample of "power on" codes that I captured using GC IR learner on 20ms :

0000 0070 0000 0042 0080 0040 0010 0030 0010 0011 0010 0011 0010 0011 0010 0030 0010 0011 0010 0011 0010 0011 0010 0011 0010 0030 0010 0011 0010 0030 0010 0030 0010 0011 0010 0030 0010 0030 0010 0030 0010 0030 0010 0030 0010 0011 0010 0011 0010 0030 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0030 0010 0030 0010 0030 0010 0030 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0030 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 02EB

Thanks in advance for your answer

10 comments

Please sign in to leave a comment.