Follow

iTach Wifi unit and the Netgear Orbi

When attempting to connect an iTach WiFi unit (WF2IR, WF2SL, and WF2CC) to a Netgear Orbi router, you may need to disable the 20/40 MHz coexistence on the Orbi.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

3 Comments

  • 0
    Avatar
    Iker Pryszo

    With newest firmware (tested on 2.0.0.74) you ALSO need to disable "Enable WMM (Wi-Fi multimedia) settings" for the 2.4GHz b/g/n settings (you can leave it enable on 5GHz 802.11a/n/ac).

  • 0
    Avatar
    Sai

    Network is ok but suddenly device is not locking

  • 0
    Avatar
    Iker Pryszo

    Still no issue on my side with Firmware 2.1.4.10.

    Make sure to disable the 20/40 MHz coexistence and WMM (Wi-Fi multimedia) settings

Please sign in to leave a comment.
Powered by Zendesk